Maneuvers – Elecmegom https://elecmegom.com/en/ Maniobras y componentes para ascensor Mon, 26 Feb 2024 11:35:58 +0000 en-US hourly 1 https://elecmegom.com/wp-content/uploads/2023/10/cropped-flaticon-32x32.jpg Maneuvers – Elecmegom https://elecmegom.com/en/ 32 32 EM1000 https://elecmegom.com/en/portfolio-item/em1000/ Mon, 26 Feb 2024 11:30:18 +0000 http://elecmegom.com/portfolio-item/em1000/
Descripción de la imagen

Descripción:

  • Maniobra de ascensor adaptada a elevadores destinados a viviendas unifamiliares en las que no es necesario cumplir con las normativas EN 81.1/2.
  • Esta maniobra se ha concebido bajo las especificaciones de las normas 2006/42/CE y EN81-41:2011.
  • Además de todos los requisitos necesarios para este tipo de instalaciones, hemos querido añadir características especiales que no están contempladas en dichas normas, nuestra intención de mejora de producto, ha hecho que funcionalidades en modo remoto de telemantenimiento, telecontrol y telegestión estén incorporadas en esta gama de ascensores los cuales no es habitual que dispongan de estas opciones.
  • Con la experiencia de más de 35 años en la fabricación de maniobras para ascensor controladas con electrónica, se ha desarrollado con todas las garantías de funcionamiento, con todos los avances y características que pueden encontrarse en el mercado, consiguiendo que tanto el cliente final como el instalador, dispongan de una seguridad adicional al confiar en nosotros y nuestros productos.
  • Bajo las normas de calidad y especificaciones técnicas que atesoran las otras gamas de maniobras fabricadas por Elecmengom, se ha desarrollado esta nueva maniobra EM1000, consiguiendo un producto único, fiable, fácil de instalar y como en todos los casos que nos preceden, sencilla para realizar su conservación.
  • Diseño basado en una maniobra monoplaca, siendo compatible con los dos tipos de sistemas de elevación existentes en unifamiliares, mediante tracción hidráulica o por tracción eléctrica mediante un variador de frecuencia consiguiendo un confort extra.
  • Incluyendo características como el cargador de baterías para realizar el rescate automático en caso de falta de tensión, configuración de parámetros directamente sobre la placa de control, maniobra de inspección en la propia placa.

Maniobra

EM1000 v1
Tipo Universal (Mantenida) Universal (registrada) Colectiva Subida/Bajada
Cotas 4 4 NA
Maniobras en multiplex No aplica en este tipo de maniobras.
Tipos de tracción ·       Hidráulico arranque Directo o Estrella/Triangulo

·       VVVF motores de inducción (asíncronos)
Velocidad Hasta 0,3 m/seg.
Rescate en caso de emergencia ·       En hidráulico mediante válvula de emergencia en bajada
Telemantenimiento Compatible con la plataforma megom OnLine mediante internet
Normativas ·       EN81-41:2011 (Ascensores especiales para el transporte de personas y cargas)

·       2006/42/CE (Directiva de máquinas)

·       UNE-EN 12015:2005 (Compatibilidad Electromagnética, Emisión)

·       UNE-EN 12016:2005 + A1:2008 (Compatibilidad Electromagnética, Inmunidad)
Diferentes centrales hidráulicas Compatible con los siguientes sistemas

·       Hidráulico con grupo de válvulas GMV-3010 (GMV)

·       Hidráulico con grupo de válvulas BLAIN KV1S

·       Hidráulico con grupo de válvulas BLAIN KV2S
Sistema de emergencia Incluye el sistema de emergencia

·       Salida de sirena mediante altavoz, también utilizado para GONG de llegada.

·       Salida para plafón de emergencia cuando falta tensión en la finca.

·       Salida auxiliar de 12Vdc para alimentar otros dispositivos como un intercomunicador

·       Cargador de baterías 12Vdc
Registro de llamada Salidas para registros de exteriores 24Vdc común positivo, protegidas individualmente ante un cortocircuito.
Entradas ·       Abrir puertas

·       Cerrar puertas

·       Fotocélula

·       Sobrecarga

·       Sonda externa cuarto máquinas

·       3 entradas programables para funciones especiales.
Salidas auxiliares ·       Alumbrado temporizado de cabina

·       Ventilación forzada de motor

·       Ventilación automática de cabina

·       Salida para inhibición de intercomunicador

·       Control de segundo operador de puertas
Señalización de botoneras Salidas 24Vdc

·       Flechas de dirección

·       Ocupado

·       Disponible

·       Puerta abierta

·       Luminoso de “ESTA” en planta

·       Posicional por lámparas

·       Luminoso de “SOBRECARGA”
Inspección desde la placa EM1000 Conmutador normal/inspección

Pulsador de subida

Pulsador de bajada
Pulsadores en placa EM1000 4 Pulsadores para realizar labores de mantenimiento como ver últimas averías.
Programación Utilizando los pulsadores de inspección de la placa y pulsadores de llamada

LCD incluido en la placa de control.
Indicadores de planta Control por un solo hilo de

·       3 Matrices EM2POS

·       6 Matrices EM2PRO

·       LCD vertical EM2LCD

·       LCD horizontal LCDHOR

·       LCD exteriores LCDECO 2,5”

·       Pantalla gráfica LCD azul MK-707

·       Pantallas TFT COLOR 4”, 7”, 10”
Control de operador de puertas ·       Monofásico

·       Trifásico

·       V3F (señales por tensión)

·       V3F (señales sin tensión)

·       Control de electro cerraduras.

Especificaciones técnicas maniobra EM1000
Rango de tensión de alimentación de la placa 18Vac / 24Vac
Rango de tensión de válvulas 12Vdc / 230Vdc
Rango de tensión de series de seguridades 110Vac / 130Vac
Rango de tensión entrada control de alumbrado 200Vac  / 250Vac
Tensión de salida de vávula de emergencia 12Vdc (3A)
Tensión de salida auxiliar para otros elementos 24Vdc (3A)
Tensión de salida auxiliar emergencia para otros elementos 12Vdc (1A)
Tensión de registros de llamada 24Vdc común positivo (protegidas ante un cortocircuito)
Tensión de salidas de luminosos 24Vdc, 3 Amperios por cada salida

·       Luz subida

·       Luz bajada

·       Puerta abierta

·       Ocupado
Puertos de comunicaciones ·       Paralelo (entradas optoaisladas) 24 Vdc

·       RS-485 (para plataforma Megom Online)

·       RS-485 (con intercomunicador bidireccional)
Dimensiones mecánicas placa EM1000 Ancho 260mm x Alto 130mm x Fondo 45mm.
Tipo de conexiones Conectores enchufable tipo cepo (Wago)
LCD de visualización de mensajes LCD verde de dos filas de 16 dígitos
Protecciones incluidas ·       Fusible de alimentación de maniobra (0-18V)

·       Fusible de alimentación de emergencia 12Vdc

·       Fusible de alumbrado de cabina

·       Fusible de puertas

·       Fusible de serie de seguridades

·       Fusible de tensión de válvulas/freno

Parámetros  configurables maniobra EM1000 v1
Actualización de Firmware Para actualizar el software de funcionamiento o añadir funcionalidades una vez instalada la maniobra, se realiza mediante un pendrive con la nueva version de software, que se insertará en el conector USB que dispone la placa EM1000.
Sistema de programación Mediante los pulsadores de inspección de la placa y pulsadores de llamada

LCD 2*16 incluido en la placa de control
Acceso a configuración Con Password de 4 dígitos configurable
Menú de averías Ultimas 32 averías con los siguientes datos por cada una de ellas

Número de avería

Código de avería

Planta en la que se encontraba el ascensor

Dirección en la que marchaba o estado de reposo

Velocidad a la que estaba funcionando

Tiempo transcurrido desde que se reseteo la maniobra hasta la avería

Reset de toda la pila de averías
Menú de programación de parámetros 1.   Modificación de códigos de planta en displays

2.   Función de imanes (para ayuda en plantas cortas)

3.   Definición individual de puertas de piso (abiertas en planta o cerradas)

4.   Ajuste de Reenvío (planta, desde donde y tiempo)

5.   Tiempo de retardo a la parada

6.   Tiempo de apagado luz de cabina

7.   Tiempo para aparcar con puertas cerradas

8.   Tiempo de avería 10 (tiempo de recorrido)

9.   Tiempo de avería 6 (Tiempo máximo en el arranque)

10. Modo de recogida de llamadas (pulsador mantenido o no)

11. Modo funcionamiento de termistancia de motor

12. Rango de valores para actuar la sonda de temperatura

13. Señal para cualquiera de nuestros posicionales (1 hilo)

14. Control de Síntesis de voz

15. Preapertura anticipada de puertas de cabina
Inicialización de parámetros Inicializa códigos de Display

Inicializa puertas de piso

Inicializa imanes de piso

Inicialización completa (parámetros por defecto)

Equipamiento opcional maniobra EM1000
Placa EM3LUM EM3LUM para luminosos especiales no incluidos en la base
Placa de botonera de inspección EM1PBR2 placa de interconexiones en botonera de inspección
Botonera de inspección EM1BIP Botonera de inspección PLASTICO adaptada a maniobra EM2000

EM1BIM Botonera de inspección METALICA adaptada a maniobra EM2000
Sintetizador de voz EM2PRO Sintetizador de voz varios idiomas

* La síntesis está incluida en los módulos:

·       EMBI_v3

·       EMBI_v4

·       Pantalla gráfica MK800
Rectificador de leva EMRECT rectificador hasta 3A

EMRECT12 rectificador hasta 12A
Sistemas de comunicación ·       EMBI_v3 Intercomunicador por línea terrestre

·       Track MK-775 (Track para comunicación GSM)

·       EMBI_v4 Intercomunicador para adaptar al MK-775

·       Pantalla MK800 con comunicación bidireccional
Posicionales compatibles ·       EM2POS Display 3 matrices de puntos

·       EM2LCD LCD azul vertical

·       LCDHOR LCD azul horizontal

·       LCDECO LCD 2,5”

·       TFT serie MD Pantallas gráficas color 4”, 7” y 10”

·       TFT serie MK800 7”
Sistemas de control de carga Pesacargas VK3

·       BPP Célula en la bancada

·       LC Célula en los cables

·       TCA Células debajo de cabina

·       Células independientes por cable SW

Pesacargas con célula integrada en los cables LCK
Variadores de frecuencia compatibles Maniobras para máquinas con reductor

·       Variador FUJI FRENIC MULTI

·       Variador FUJI FRENIC LIFT

·       Variador OMRON/YASKAWA L1000

Para usuarios de éste producto ponemos a su disposición una guía completa en diferentes idiomas. Haga clic sobre el icono de la bandera que corresponde al idioma que desea descargar.

Descripción

Español

Francaise

English

Catálogo publicitario maniobra EM1000 V1

 CATALOGO EM2000

Dimensiones de armarios EM1000 V1

 MEDIDAS DE ARMARIOS EM2000

Formulario de pedido/presupuesto maniobra

 FORMULARIO MANIOBRA

Formulario de pedido/presupuesto premontada

 FORMULARIO PREMONTADA
]]> EMADA https://elecmegom.com/en/portfolio-item/emada/ Wed, 09 Jul 2014 10:35:08 +0000 http://elecmegom.com/portfolio-item/emada/
Descripción de la imagen

Description

  • As a solution to the great demand received to update existing controllers, regardless of the manufacturer, which before the adaptation work in one or two speeds, and which need a frequency converter control, with which is achieved in addition to a precise stop, a comfort that can not give a motor controlled by a conventional system, under normal conditions would be forced to replace the entire controller, Elecmegom has successfully developed the EMADA adaptation and has been marketing since 2013.
  • It consists of a small cabinet with a frequency inverter, which is installed next to the existing one, with minimal interconnections between the two cabinets, it is achieved that the old controller gives us the necessary information to govern the inverter with all the features that a conventional controller would do, but reducing its cost by 50% over the current value of any controller on the market.
  • Its main feature is the ease with which the installation is done, intuitive and with virtually no need to modify the main cabinet, this feature along with the simple implementation of the drive, makes it an alternative to consider in communities where you can take advantage of the existing cabinet and you want to give a plus both comfort and economic improvement in the reform of the elevator.
  • The frequency inverter adds durability to the mechanical parts that make up the traction system, the machine itself, the brake, the traction cables, etc., by achieving smooth accelerations and decelerations, avoiding jerks and sudden stops that cause greater wear of mechanical parts and therefore a premature change compared to systems that integrate the frequency inverter.
  • Safe control system, subject to the elevator safety series, it will never make any movement if these are not closed, in case of a series fall while the elevator is working, the EMADA adaptation will stop immediately in a safe way.
  • In the case of a 2-speed control it is not necessary to include any position control element, since the adaptation board will work with the same signals as the control currently does, in 1-speed control, only a magnetic detector will be necessary for the plant level control.
  • So far, all of the shunts without exception, to which an EMADA has been installed, are working properly, and customers have been fully satisfied with the result, the experiences have been multiple, with different brands and models of shunts, in all cases the solution was present in the design of our EMADA adaptation circuit.
  • It performs brake control, thus achieving better synchronization between the variator and the motor, resulting in smooth starts and progressive decelerations, performing millimetric leveling on the ground.
  • In addition, it controls the opening of doors, so as not to allow their opening until the elevator is completely stopped.
  • Another of its outstanding features is that it can control without the need to add additional elements, floor positional and graphic displays to be placed in the cabin or on the floor landing, it can also control a voice synthesizer to inform in the cabin through voiceovers of the floor to which the elevator arrives.

Maneuver

EMADA (Adaptation to any maneuver)
Types of traction
  • Electric 1 speed
  • Electric 2 speed
Maneuver models Any manufacturer and model
Coordinates Any number of stops
Engine type Asynchronous motors with gearboxes
Speed Up to 1.2 m/sec.
Telemaintenance It is not compatible with the megom OnLine platform.
Regulations
  • Elevator Directive 95/16/EC (Lift Directive)
  • UNE-EN 81-21:2010 (Safety rules for elevators)
Tickets
  • Optocoupled
  • Multi-voltage.
  • Both DC and AC inputs
  • Auxiliary input for various functions
Thermistor input
  • Motor thermistor control input
Inspection entry
  • Input to operate at inspection speed
Control outputs
  • Protected control outputs to the drive
  • Control output to main contactors
  • Output to brake contactor
  • Safe enable output to the drive
  • 2 Auxiliary outputs for various functions
Programming Operation programming switches
Signal indicators Signaling of inputs and outputs by means of LEDs

  • 10 red diodes for output signaling
  • 4 green diodes for signaling of control inputs
  • 2 yellow leveling control diodes
  • 2 red power status diodes
Door control
  • Relay-controlled operators
  • Operators controlled by 2 relays or contactors
1-wire communication
  • Positional 3 EM2POS arrays
  • Positional 6 EM2PRO matrices
  • EM2LCD vertical LCD
  • Horizontal LCD LCDHOR
  • Blue LCD graphic display MK-707
  • TFT COLOR 4″, 7″, 10″ displays
  • EM2PRO Voice Synthesizer
2-wire communication
  • Voice synthesizer EMBI_v4

Technical specifications adaptation to EMADA maneuvers
Board supply voltage range 18Vac / 24Vac
Safety series voltage range 24Vac-Vdc / 230Vac-Vdc
Output voltage of general contactors 24Vac-Vdc / 230Vac-Vdc (5A)
Brake contactor output voltage 24Vac-Vdc / 230Vac-Vdc (5A)
Auxiliary output voltage for other elements 24Vdc (3A)
Communications ports
  • Elecmegom protocol 1 communication wire
  • RS-485 (with graphic displays and synthesizer)
Mechanical dimensions EMADA plate Width 117mm x Height 155mm
Mechanical dimensions EMADA cabinet Width 425mm x Height 650mm x Depth 250mm
Powers in Fuji Multi
  • 400V/4Kw
  • 400V/5,5Kw
  • 400V/7,5Kw
  • 400V/11Kw
  • 400V/15Kw
  • 230V/5,5Kw
  • 230V/7,5Kw
  • 230V/11Kw
  • 230V/15Kw
Included variator elements
  • Frequency inverter
  • Input reactance
  • Inlet filter
  • Output filter
  • Braking resistance
Type of connections Plug-in clamp-type connectors (Wago)

Configurable parameters in EMADA maneuver
Programming system By means of 3 programming switches

  1. 1-speed operation / 2-speed operation
  2. Inspection signal NO / Inspection signal NC
  3. Not applicable
internal programming Sequence of stops for non-graphical plant positionals

Sequence of stops for graphic displays

Synthesizer floor sequence

Optional equipment EMADA maneuver adaptation
Compatible positionals
  • EM2POS Display 3 dot matrix
  • EM2LCD vertical blue LCD
  • LCDHOR Horizontal blue LCD
  • MK707 Blue graphic LCD display
  • TFT MD series 4″, 7″ and 10″ color graphics displays
Voice synthesizer EM2PRO Speech synthesizer multiple languages

EMBI_v4 Bidirectional communication module with Track
Compatible frequency inverters Maneuvers for geared machines

  • FUJI FRENIC MULTI Inverter
  • FUJI FRENIC LIFT Inverter
  • OMRON/YASKAWA L1000 Inverter

TABLE_EMADA_1TABLE_EMADA_2TABLE_EMADA_3PLACA_EMADA

em2lcd_1 em2pos_3 lcdhor synthesizer_2 vvvf_var2

For users of this product we provide a complete guide in different languages. Click on the flag icon corresponding to the language you wish to download.

Description

Spanish

French

English

EMADA advertising catalog for maneuvering adaptations

 spain_flag

Dimensions of EMADA retrofit cabinets

 spain_flag English

ADAPTATION, EMADA, VARIATOR

]]> EM2000 https://elecmegom.com/en/portfolio-item/em2000-v5-1/ Fri, 04 Jul 2014 11:52:52 +0000 http://elecmegom.com/portfolio-item/em2000-v5-1/
Descripción de la imagen

Description

  • The evolution of the original EM2000 controller with a long trajectory of 10 years and more than 20,000 installed operations, due to this experience, together with the needs of our customers, the new regulations, the characteristics that distinguished our previous model, the proven reliability and fundamentally the desire to improve, have been reflected in the new EM2000 V5.1 controller.
  • The technical team, together with all Elecmegom’s staff, has been involved in the development of this new maneuver, in order to achieve a unique, reliable, easy to install and, what seems to us even more important, simple to maintain product.
  • Design based on a single-plate maneuver, which can be compatible with all types of existing lifting systems, 1 or 2-speed electric, hydraulic or VVVF control either in its asynchronous motor version or gearless permanent magnet synchronous.
  • Board optimized for elevator control, including features such as battery charger, system control for A3 compliance, parameter setting directly on the control board, inspection maneuver on the board itself. integrated machine room temperature control, emergency siren output and with the same loudspeaker output for the GONG output on arrival at the plant.

Maneuver

EM2000 V5.1
Type Universal Selective Collective Up/Down
Coordinates 24 24 14
Multiplex maneuvers Up to four elevators operating in multiplex
Types of traction
  • Electric 1-speed or 2-speed
  • Hydraulic Direct Start or Star/Triangle Start
  • VVVF induction motors (asynchronous)
  • VVVF permanent magnet gearless motors
No machine room Synchronous and asynchronous motors

Integral cabinets, including the frequency converter

Divided cabinets, control at landing and inverter in shaft
Speed Up to 1.6 m/sec.
Emergency rescue
  • In hydraulic by means of downstream emergency valve
  • With inverter and asynchronous motors with UPS 2000VA.
  • With inverter and permanent magnet motors
    • Rescue due to decompensation 850VA
    • UPS 2000VA traction rescue
    • Both non-intervention rescues and door openings
Telemaintenance Compatible with the megom OnLine platform via the Internet.
Regulations
  • Elevator Directive 95/16/EC (Lift Directive)
  • UNE-EN 12015:2005 (Electromagnetic Compatibility, Emission)
  • UNE-EN 12016:2005 + A1:2008 (Electromagnetic Compatibility, Immunity)
  • UNE-EN 81-21:2010 (Safety rules for elevators)
  • UNE-EN 81-70:2004 + A1:2005 (Accessibility standard)
  • UNE-EN 81-73:2005 (Fire regulations)
  • UNE-EN 81-28:2004 (Remote Alarm Standard)
Standards A3UNE-EN 81-2:2001 + A3:2010UNE-EN 81-1:2001 + A3:2010 Compatible with the following systems

  • Hydraulic with GMVA3 valve group (GMV)
  • Hydraulic with valve group DLV (GMV)
  • Hydraulic with DSV valve group (BUCHER)
  • Hydraulic with HSV valve group (MORIS)
  • Hydraulic with EKMI valve group (MORIS)
  • Hydraulic with valve group Oleo A3 (MP)
  • Hydraulic with valve group HDU (WITTUR)
  • Electrical with UCM limiter (GERVALL)
  • Electric permanent magnet motors permanent magnet control brake microprocessors
Emergency system Includes emergency system

  • Siren output via loudspeaker, also used for arrival GONG
  • Outlet for emergency soffit when there is a power failure on the property
  • 12Vdc auxiliary output for powering other devices such as intercoms
  • Battery charger 12Vdc
Call log Outputs for outdoor registers 24Vdc positive common individually protected against short-circuit.
Tickets
  • Open doors
  • Close doors
  • Photocell
  • Overload
  • Complete
  • Fire Service
  • Independent service
  • External machine room probe
  • 3 programmable inputs for special functions.
Auxiliary outlets
  • Cabin timed lighting
  • Forced motor ventilation
  • Automatic cabin ventilation
  • Output for intercom inhibition
  • Second door operator control
Button panel signaling Multivoltage Outputs

  • Direction arrows
  • Busy
  • Available
  • Open door

Outputs 24Vdc

  • You go to the plant
  • Sense of arrival
Inspection from the EM2000 board Normal/inspection switch

Up pushbutton

Down pushbutton
EM2000 on-board help buttons One pushbutton for each cabin and outside calls

Door reopening button

NVI leveler test button

NVP Leveler test button

Siren button

* All pushbuttons with an associated LED
Programming Using the inspection buttons on the board and theLCD call buttons included on the control board
Plant indicators Single-wire control of

  • 3 EM2POS arrays
  • 6 EM2PRO matrices
  • EM2LCD vertical LCD
  • Horizontal LCD LCDHOR
  • Blue LCD graphic display MK-707
  • TFT COLOR 4″, 7″, 10″ displays
Door operator control
  • Single-phase
  • Three-phase
  • V3F (voltage signals)
  • V3F (de-energized signals)
  • Operator 24Vdc

Technical specifications EM2000 maneuver
Board supply voltage range 18Vac / 24Vac
Safety series voltage range 110Vac / 130Vac
Lighting control input voltage range 200Vac / 250Vac
Emergency ceiling outlet voltage 12Vdc (1A)
Auxiliary output voltage for other elements 24Vdc (3A)
Emergency auxiliary output voltage for other elements 12Vdc (1A)
Tension of call records 24Vdc positive common (protected against short circuit)
Voltage of luminous outputs Any AC or DC voltage

4 Amps per output

Rising light

Light lowered

Open door

Busy
Communications ports
  • Parallel (optoisolated inputs) 24 Vdc
  • RS-485 (for Megom Online platform)
  • RS-485 (with bidirectional intercom)
Mechanical dimensions EM2000 plate Width 200mm x Height 270mm x Depth 50mm.
Type of connections Plug-in clamp-type connectors (Wago)
LCD message display 16-digit two-row green LCD
Potentiometers Door opening time (3 to 14sec.)

Waiting time between calls (3 to 15sec.)

Arrival GONG volume
Configuration switches SW1 – 8 switch of maneuver configuration

  1. Universal / Selective
  2. Limitation of booth calls
  3. Electric / hydraulic drive
  4. 1 Speed / 2 Speed
  5. Fixed / flashing registers
  6. Doors closed / open
  7. 1 basement
  8. 2 basements

SW2 – 8 switch configuration switch

  1. Blocking faults or faults with 2 attempts
  2. Buzzing open door
  3. Resend
  4. Frequency inverter
  5. Re-leveling module
  6. Stop delay 50 msec.
  7. Stop delay 100 msec.
  8. Delay to stop 200 msec.

SW3 – 2 siren tone selection switch

SW4 – 2 GONG tone selection switches

Configurable parameters EM2000 V5.1 maneuvering
Programming system By means of the inspection pushbuttons on the plate and call buttons

LCD 2*16 included on the control board
Access to configuration With configurable 4-digit password
Troubleshooting menu Last 32 failures with the following data for each of them

Fault numberFault code

Floor where the elevator was located

Direction of travel or state of rest

Speed at which it was operating

Reset of the entire fault stack
Parameter programming menu
  1. Modification of plant codes in displays
  2. Magnet function (for short plant support)
  3. Definition of floor doors (configures double shipments)
  4. Forwarding Adjustment (plant, from where and time)
  5. Breakdown time 10 (travel time)
  6. Breakdown time 6 (Maximum start-up time)
  7. Call pickup mode
  8. Duplex outdoor call information
  9. Simplex outside call information
  10. Timed lighting time
  11. Parameters for cabinets with VVVF (VVVF types and rescues)
  12. Call booth information
  13. Door status voice synthesis
  14. Early pre-opening of cabin doors
  15. Time to open doors
  16. Configuration of auxiliary inputs
  17. Standard A3, defines the system to be controlled by the maneuver.
  18. Leveling by one row of magnets or by two rows of magnets
  19. Range of values to actuate the temperature probe
Parameter initialization Initializes Display codes

Initializes floor doors

Initialize floor magnetsFull initialization (default parameters)

Optional equipment for EM2000 maneuvering
Multiplex Plate EM2MUL up to 4 elevators
Hydraulic power plate EM2HR for hydraulic maneuvering
Asynchronous VVVF power board EM2VFR for geared motors
VVVF gearless power board EM2VFF for permanent magnet motors
Multiplex calls up to 16 EM3ADA (Parallel calls up to 16 stops)
Multiplex calls up to 24 EM2COM28 (Parallel calls up to 24 calls)
Inspection pushbutton panel plate EM2PBR3 interconnection board in pushbutton panel
Inspection pushbutton panel METALIC inspection pendant adapted to EM2000 control system
Voice synthesizer EM2PRO Multi-language voice synthesizer* Synthesis is included in the EMBI_Eco or EMBI_v4 modules.
Brake/lever/valve rectifier EMRECT rectifier up to 3A, EMRECT12 rectifier up to 12A
Communication systems
  • EMBI_Eco Land Line Intercom
  • Track MK-775/MK-875 (Track for GSM communication)
  • EMBI_v4 cabin module for communication via gsm track MK-775/MK-875
Compatible positionals
  • EM2POS Display 3 dot matrix
  • LCDECO LCD blue reduced
  • EM2LCD vertical blue LCD
  • LCDHOR Horizontal blue LCD
  • MK800 TFT color graphic display
  • TFT MD series 4″, 7″ and 10″ color graphics displays
Load control systems VK3 Load Weigher

  • BPP Cell on the bench
  • LC Cell in cables
  • TCA Cells under cabin
  • Independent cells by SW cable

Load cells with integrated load cell in LCK cables
Voice synthesizer EM2PRO Multi-language voice synthesizer* Synthesis is included in the EMBI_Eco or EMBI_v4 modules.
Compatible frequency inverters Maneuvers for geared machines

  • FUJI FRENIC LIFT2 LM2C Inverter
  • FUJI FRENIC LIFT2 LM2A Inverter
  • OMRON/YASKAWA L1000 Inverter
  • Inverter ZIEHL-ABEGG 4CA

Maneuvers for gearless permanent magnet machines

  • FUJI FRENIC LIFT2 Inverter
  • ZIEHL ABEGG 4CS Inverter

EM2000_2V EM2000_FUJI EM2000_HD EM2000_SCM1 EM2000_ZIEHL LCD_EM2000_1 PLATE_EM2000

VVVF_VAR SYNTHETIZER POSITIONS PESACARGAS INTERCOM EM3ADA EM2VFR EM2VFF EM2PBR2 EM2MUL EM2HR EM2COM28 BOT_INSP

For users of this product we provide a complete guide in different languages. Click on the flag icon corresponding to the language you wish to download.

Description

Spanish

French

English

EM2000 V5.1 Maneuvering advertising brochure

 EM2000 CATALOG

Dimensions of EM2000 V5.1 enclosures

 EM2000 CABINET DIMENSIONS EM2000 CATALOG

Maneuver order/quote form

 MANEUVER FORM

Pre-assembled order/quote form

 PRE-ASSEMBLED FORM

EM2000, EM2000 V4.5, MANEUVER, MANEUVER PLATE

]]> EM4000 https://elecmegom.com/en/portfolio-item/em4000-v1/ Mon, 28 Apr 2014 09:40:05 +0000 http://elecmegom.com/portfolio-item/em4000-v1/
No se encontró imagen destacada

Description

Initially designed to be housed in the frame of the outer door, it is small in size, allowing it to be installed in the door frame.
its installation in 120mm door frames.

It consists of two circuits, a control circuit with LCD with which you can configure and view the status
of the elevator, in addition to being able to check the latest faults, the elevator parameterization,
battery charge and control cabinet temperature.

It is added in the version of BLUE screen on EM4000 board, direct communication with the FUJI LIFT2 drive, both LM2A and LM2C, with this we can have remote control of the drive, doing telemetry and saving the parameter settings of the drive on the platform to be able to dump that paarametrization in a new one, in case of a problem with the drive.

Allows Poletuning or Autotuning from the EM4000 board, accessing a customized menu for this function depending on the type of motor to be controlled.

Allows remote resetting of the drive, avoiding waiting for the user in the event of a momentary error that has caused the drive to block, including the BbE fault.

The other circuit is the power circuit, which includes the phase detector, the motor thermistor control, and all the inputs that monitor the elevator status.

The frequency inverter will be controlled by the controller, installed in the shaft, close to the machine.
A console in the door frame will allow access to the programming of the door, as well as monitoring the direction of the elevator and the speed at any given moment.

The design began in 2011 and production was implemented in 2014, during 3 years cabinets were manufactured in a door frame, in 2017 the production of EM4000 controllers for installations with machine room and without machine room in an integral cabinet began, in 2023 a blue multi-line LCD screen and the connection for communications between the board and the FUJI inverter were incorporated, thus achieving remote control of the frequency inverter.

Closet in landing (door frame)

  • EM4000 control board with maneuver control console.
  • EM4VF power board to control safety devices and VVVF.
  • Automatic and differential circuit breakers and switchgear protection.
  • Parameterization console of the frequency inverter.
  • Reduced width 120mm*2200mm height.
  • User tray to allow manual rescue.
  • Cockpit indication pilot at plant level (uncocking area).
  • Pilot light indicating elevator in motion.
  • Communication with the cabin by gondola telephone.
  • Emergency lighting by means of a portable ceiling light.
  • Cabinet opening by means of triangular door key.

3VF shaft cabinet

  • Cabinet located in the shaft next to the traction machine.
  • Dimensions, width 500mm*450mm*230mm depth.
  • FUJI Frenic Lift frequency inverter, exclusive for elevators.
  • Maneuver prepared for permanent magnet synchronous machines.
  • Closed-loop operation with absolute encoder.
  • Silent power and brake contactors.
  • Optimization of wiring to facilitate the assembly of the maneuver.
  • UPS (Uninterruptible Power Supply) for emergency rescue.
  • Including automatic rescue by brake opening, in the event of a general power failure, it takes the cabin to the ground and opens the cabin doors so that the cabin can be vacated.

Pre-assembled maneuver

  • Suitable for minimized pre-assembled installation.
  • The emergency system is located on the inspection pendant.
  • It includes the interconnections between the landing cabinet and the shaft.

EM4000 SCM in Integral cabinet

  • Cabinets for elevators that do not have a machine room and that cannot house the maneuver in the door frame, a cabinet is chosen outside the door frame, with a height equal to the elevator door so that it is aesthetically included inside the elevator door.
  • Control on geared or gearless machines, always controlled by a frequency inverter.
  • It includes automatic rescue in case of interruption of the power supply, in case of machines with reducer, rescue by traction (controlled by variator), while in gearless, the rescue will be performed by decompensation, controlled by the brake, in both cases by means of the UPS (Uninterruptible Power Supply) that would include the maneuver.
  • The control cabinet will house both the EM4000 control board with control console and the EM4VFR power board to control safety and VVVF devices.
  • Parameterization console of the frequency inverter.
  • Default dimensions to fit typical elevator doors 2200mm*320mm*240mm (H*W*D).
  • Cabinet with 3 divisions, the central one will be for the user, with triangle key, includes the automatic and differential protection elements, rescue elements, visualization of the cabin at plant level.
  • FUJI Frenic LIFT2 LM2A frequency inverter, exclusively for elevators in gearless operation, FUJI Frenic LIFT2 LM2C in geared motors.
  • In gearless closed-loop operation with absolute encoder, silent power and brake contactors.

EM4000 With Machine Room

  • Cabinets for elevators with machine room, in any of the electrical versions controlling the machine with frequency inverter.
  • Control on geared or gearless machines.
  • In case of emergency, rescue can be performed by traction in the case of geared machines; with gearless machines, in addition to rescue by traction, it can also be performed by decompensation.
  • The control cabinet will house both the EM4000 control board with control console and the EM4VFR power board to control safety and VVVF devices.
  • Parameterization console of the frequency inverter.
  • Minimized maneuvering cabinet with dimensions 810mm*550mm*250mm (Height*Width*Depth).
  • Rescue elements on the cabinet door, display of direction of rotation and speed of the drive in both normal and rescue mode.
  • Cockpit indication pilot at plant level (uncocking area).
  • FUJI Frenic Lift frequency inverter, exclusively for elevators in case of gearless operation, FUJI Frenic Multi, in geared motors.
  • In gearless closed-loop operation with absolute encoder.
  • In gearless maneuvers, silent power and brake contactors.
  • As an option, automatic rescue by brake opening, in the event of a general power failure, takes the cabin to the ground floor and opens the cabin doors to be able to vacate it, by means of the UPS (Uninterruptible Power Supply System) that would include the maneuver.

Description

EM4000 Maneuver
Type
 Universal Selective Collective
Coordinates
 32 32 32
Engine
 Permanent magnet synchronous
Speed
 Up to 2.5 m/sec.
Telemaintenance
 Through internet and megom OnLine platform
Plate calls
 One push button for each call, both cabin and outside.
Call log
 Outputs for outdoor registers 24Vdc positive common individually protected against short-circuit.
Tickets
 Opening doorsClosing doors

Photocell

Overload

Complete

Fire Service

Independent service

Machine Room Probe

Motor thermistance

3 programmable inputs for special functions.
Auxiliary inputs
 6 configurable auxiliary inputs for special functions
Button panel signaling
 Multivoltage Outputs

  • Direction arrows
  • Busy
  • Available
  • Open door

Outputs 24Vdc

  • You go to the plant
  • Sense of arrival
Specific outings
 Control of timed cabin lighting
Auxiliary outlets
 6 configurable protected auxiliary outputs for special functions
Inspection from the plate
 Normal/inspection switch

Up pushbutton

Down pushbutton
Reopening pushbutton
 Door reopening pushbutton on plate
Plant indicators
 Control by a single thread of:

3 EM2POS arrays

EM2LCD vertical

LCDHOR horizontal

Reduced LCD LCDECO

TFT COLOR 4″, 7″, 10″ displays

MK800 graphic display
Multiplex
 Up to four elevators in Quadruplex
Door operator
 Included on two shipments

Single-phase

Three-phase

V3F (voltage signals)

V3F (de-energized signals)

Operator 24Vdc
Specific outings
 Control of timed cabin lighting
Auxiliary outlets
 6 configurable protected auxiliary outputs for special functions
EMC
 Yes
Programming
 4 Programming keys on control board

BLUE LCD included in the control board
Configurable parameters
 Control board and power board

Description

Parameters
Programming system
 By means of 4 push buttons, up, down, Enter, Escape, BLUE LCD of enlarged dimensions, all the elements included by default in the control board of any maneuver.
Access to configuration
 With configurable 4-digit password.
Troubleshooting menu
 Last 32 failures with the following data for each of them

  • Failure number
  • Fault code
  • Floor where the elevator was located
  • Direction of travel or state of rest
  • Speed at which it was operating
  • Reset of the entire fault stack
Parameter programming menu
  1. Elevator Traction
  2. Parameters for cabinets with VVVF (VVVF types and rescues)
  3. Modification of plant codes in displays
  4. Definition of floor doors (configures double shipments)
  5. Forwarding Adjustment (plant, from where and time)
  6. Maneuvering times (Open, Standby, Lighting, Faults)
  7. Definition of EM4EXP calls and modules
  8. Universal, Selective, Universal/selective maneuvering
  9. Special call lights
  10. Voice synthesis of door status
  11. Safety module for door open leveling
  12. Door pre-opening (with safety module)
  13. Standard A3
  14. Change magnet functions
  15. Stop delay
  16. Machine room temperature ranges
  17. Abuse of booth calls
  18. Phase detector (Enable)
  19. Motor thermistance (Enable)
  20. Configure Auxiliary Outputs
  21. Configure Auxiliary Inputs
  22. Configure cabin sensors
  23. Cabin acoustic recording
Parameter programming menu
 Initializes Display codes
Initializes floor doors
Initializes floor magnets
Complete initialization (default parameters)
EM4EXP EXPANSION MODULE

EM4EXP Cabin expansion module

  • The EM4000 main control board supports up to 8 stops both in the cabin and outdoors. For elevators higher than this number of heights, this call expansion module has been designed.
  • In case of exceeding 8 heights, the EM4EXP module will be located in the cabin, leaving the 16 calls that the EM4000 board has as external calls, the EM4EXP module has 16 calls, in this case they would be the cabin calls.
  • Communication between the module and the EM4000 board via a 2-wire bus to the cabinet.
  • In addition to the 16 cabin calls, the EM4EXP module has the inputs that intervene in the cabin; Reopen boarding 1, Reopen boarding 2, Photocell, Close doors, Complete, Overload, Fire, Independent Service.
  • It has the following outputs; cabin display control, synthesizer and bidirectional intercom.
  • The EM4EXP module is also used in case the installation exceeds 16 stops, achieving with additional modules, the 32 stops, selective up and down.
  • Other uses are the signaling of plant accesses, walking presentidos, positional by lamps.
EM4RECT BRAKE MODULE

EM4RECT Brake Rectifier Module

  • New high-performance brake rectifier module
  • Maximum voltage and current capacity 1200V/15A.
  • Compatible for the activation of gearless machines with overexcitation.
  • Includes brake voltage protection fuse.
  • Indication of when the brake is activated.
EMERGENCY EM4EMERG

EM4EMERG Emergency plate

  • New emergency plate with battery charger.
  • Battery capacity voltage and current 12V/700mA/h.
  • Latest generation charger for Ni-Cd batteries.
  • 12Vdc auxiliary output for connecting communication equipment.
  • Ni-Cd battery type, which means 100% longer battery life than lead acid.
  • It includes the emergency siren and the arrival gong.
  • 10W/8ohms siren/gong loudspeaker
  • Protection fuses for the EM4EMERG board and the circuits it supplies.
EM2MUL MULTIPLEX BOARD

EM2MUL Control for multiplex maneuvers

  • Designed to control up to four elevators in multiplex operation.
  • Outputs for outdoor registers 24Vdc positive common (short-circuitable).
  • 16 Stops in Universal/Selective 14 in Collective.
  • Controls elevators with different number of stops (lame maneuvers).
  • Protected against short circuits, it isolates each of the elevators it controls.
  • Switching power supply 24Vdc/3 Ampere.

EM4000 Without machine roomEM4000 cabinet with machine room VVVFEM4000 cabinet with machine room VVVFMegom Online EM4000 Platform

For users of this product we provide a complete guide in different languages. Click on the flag icon corresponding to the language you wish to download.

Description

Spanish

French

English
EM4000 V2 maneuvering advertising catalog PRE-ASSEMBLED FORM
EM4000 V2 enclosure dimensions MANEUVER FORM
Dimensions of SCM EM4000 V2 cabinets MANEUVER FORM
Maneuver order/quote form MANEUVER FORM
Pre-assembled order/quote form PRE-ASSEMBLED FORM

]]>