Description:

• Autonomous system that can be installed in any elevator for floor indication by means of a visual device or/and floor indication by means of voice locutions.
• Easy installation, no connection with the existing control system is necessary, the system is powered by 220Vac that exists in the cabin as lighting.
• Communications between autonomous and positional module by a single wire, in addition to the power supply.

• Power supply of the positionals at 24Vdc.
• A stand-alone power supply and control system to power all devices connected to the system, both display screens and voice synthesizer if required, cabin and outdoor, up to 99 devices.
• LED signals, indication of power supply at the source and activated magnet sensor.
• As necessary information for the autonomous module, a single magnetic sensor, which will detect the magnets placed on the guide to perform the position control of the cabin.
• Any sequence of numbers and/or letters can be configured in the supported positionals.
• Compatible positionals
  • EM2POS (Three matrices)
  • EM2LCD (vertical blue LCD)
  • LCDHOR (horizontal blue LCD)
  • MK707 (Blue graphic display)
  • TFT MD series (COLOR graphic display MD series)
  • EM2PRO stand-alone voice synthesizer

For users of this product we provide a complete guide in different languages. Click on the flag icon corresponding to the language you wish to download.

Description	Spanish	French	English
EM2POS stand-alone positional installation manual
EM2LCD stand-alone positional installation manual
Stand-alone positional installation manual TFT MD
Stand-alone positional installation manual SYNTHETIZER

Description

• Electronic module for plant information by means of 3 dot matrixes, both in the cabin and outdoors, displays plant information in numbers and/or letters, together with the direction in which the cabin moves rotating in the same direction.
• 3 Dot matrixes, 7 vertical by 5 horizontal, with a choice of high luminosity red and blue colors, with diffuser dimensions of 55mm horizontal by 40mm vertical.
• Operation with Elecmegom maneuvers through a wire, it is also possible its operation in standalone mode, and can be installed in any elevator regardless of the maneuver that controls the elevator, communications bus compatible with the rest of our displays, which makes it possible to combine different types of displays in the same installation.
• With the adaptation to large dies, it can be supplied with 3″ dies or with 5″ dies, in both cases in red color.
• It includes a buzzer to emit the buzzer in case the elevator is overloaded and when the external door open time is exceeded to indicate the user to close the door, these functions are configurable and can be disabled.
• If the cabin is overloaded, it indicates SOB intermittently, complying with the regulations that require this situation to be signaled both visually and audibly.
• In case of an open door or malfunctions, it displays texts describing the status of the elevator and the floor on which it is located.

Technical specifications positional 3 point EM2POS arrays
Supply voltage	24Vdc +/- 15%.
Emergency power supply voltage	12Vdc
Maximum consumption	70 mA at 24Vdc
Matrix dimensions	12.7mm × 17.8mm 0.7″/18mm22.9mm × 39.2mm 1.2″/30mm37.6mm × 53mm 2.0″/50mm dies
Dimensions visible area	55mm × 40mm 0.7″ dies 95mm × 44mm 1.2″ dies 122mm × 58mm 2.0″ dies
Mechanical dimensions	90mm x 72mm dies 0.7″160mm × 72mm dies 1.2″160mm × 72mm dies 2.0″ dies
Operating temperature	0º to 50 ºC
Brightness	typ. 200 cd/m2
Operation	Maneuver or autonomous mode
Configuration	By means of 3 switches Mode of operation Overload hum Buzzing sound with door open Rotating or fixed texts

For users of this product we provide a complete guide in different languages. Click on the flag icon corresponding to the language you wish to download.

Description	Spanish	French	English
Installation manual EM2POS operation with control
Installation manual EM2POS stand-alone operation
EM2POS die cutting drawing for small dies 0,7″.
Die-cutting drawing for EM2POS 1.2″ and 2″ die cutters