Description

• Device that allows communication between the cabin and the outside via a GSM telephone line, can be used as a GSM link to convert a digital line (GSM) to analog line to use an intercom of any manufacturer, which only allows analog line, or as a track with our EMBI4 audio and voice device.
• It has a telephone number for voice and an IP for data. The MK-775 supports all GSM/GPRS network carriers, whether CSD, USSD, SMS or, of course, voice. Data can be received via GSM (DTFM and TMDT©), GPRS or the Internet (UDP and TCP/HTTP).
• It supports m2m, which guarantees a direct and simple machine-to-machine communication with a low cost for the user, being able to work with any GSM telephone operator.
• The programming can be done by SMS, in which the parameters that we want to modify will be sent, it is also possible to perform the programming through the free platform Megom OnLine.
• Compatibility with Elecmegom controllers through two RS-485 wires, being able to interact remotely from the Megom OnLine platform, this connection will allow you to perform telemetry, telemetry and programming on your controller, with a minimum cost due to the optimization of the communications protocol used.
• Up to 4 elevators with 4 EMBI_v4 devices and a single MK-775 track, can be connected through a single GSM line, using CAN to perform communications between EMBI_v4 in each cabin and the MK-775 placed in one of the machine rooms, ensuring data management processes and audio quality.
• It includes battery charger and a 600mA/h battery, allowing to supply voltage in case of mains power failure, both to the MK-775 and to the EMBI_v4 audio module connected to the equipment, the battery charge is controlled by the module, sending a message to the maintenance company when it is not at an optimal charge level.
• It incorporates a field meter to check the coverage at all times and install the module in the location with the best signal.
• With the new megom OnLine platform, you will be able to perform the periodic tests required by the EN 81.28 standard, having a database with all the details about the tests, reports of malfunctions or battery in bad condition, this history can be exported to a file with which you can create your own reports.

Technical specifications of TRACK MK_775 module (GSM-GPRS)
Supply voltage	230 Vac
Mechanical dimensions	205x110x60 mm.
Operating temperature	0º to 50 ºC
Scope of operation	Compatible with: Movistar Vodafone Orange
Communications bus (up to 4 cabins)	Via the two CAN bus wires
Intercom with machine room	With a conventional telephone connected to the telephone jack supplied with the MK-775 module
Real time clock	Included, the events that have occurred are memorized with date and time.
Voice synthesis	Languages available for guided programming assistance: Spanish English Portuguese French Italian German Allows you to record a voice message to identify the facility when you make an alarm call.
Battery status monitoring	It includes a 12Vdc and 600mA/h battery, the module charges and controls the battery charge level, in case of low level a warning is sent by e-mail or SMS.
Communications ports	RS-485 (compatible with any Elecmegom controller) RS-422 RS-232 CAN bus
Field meter	Includes field meter to check coverage.
Call whitelists/blacklists	Allows you to define permitted telephone numbers, preventing fraudulent use of the device.
Auxiliary Inputs and Outputs	Programmable auxiliary output. Auxiliary input to report an event.
Configuration	By SMS with the different commands. By Internet through the Megom OnLine platform
Additional modules	EMBI_v4 cabin audio/voice module MK819 CAN HUB module for 4 cabs EM2BUS RS-485 communications module with control
Directives	99/05/EC 73/23/EEC 93/68CEE 89/336/EEC EN81-28
Harmonized standards	EN-55022 EN-61000 4.6 EN-61000 4.3 EN-61000 4.4 EN-61000 4.5 EN-60950-1

For users of this product we provide a complete guide in different languages. Click on the flag icon corresponding to the language you wish to download.

Description	Spanish	French	English
TRACK MK-775 Specifications
Wiring diagram MK-775 with accessories
Wiring diagram MK-775 with EM2000 controller
EMBI3/EMBI4 button panel die cutting drawing

Description

• Autonomous device that allows communication between the cabin and the outside via an analog telephone line (PSTN).
• Maximum audio clarity and power thanks to its technology and optimized digital processing algorithm.
• Programming can be done locally, using a conventional telephone, or remotely by making a phone call, all programming is guided by voice messages.
• Compatibility with Elecmegom controllers through two RS-485 wires, being able to interact the controller with the device, not allowing the emergency call if the controller considers that it is not in an emergency situation, thus avoiding false calls to the central station, in addition the controller can send to the intercom the messages that it wants to emit in each situation, getting the voice synthesis of arrival at the plant (6 languages available), these options are integrated by default in all equipment.
• Up to 4 elevators with 4 EMBI_V3 devices can be connected through a single telephone line, thanks to the configuration switches incorporated in the EMBI_V3, in case of receiving an alarm request in the central station, you can switch between booths by dialing the number of each one of them.
• The greatest guarantee of performance and robustness are the thousands of units installed, for 11 years we have marketed this product, improving in each of the versions, from the first design EMBI_V1 to the current model EMBI_V3, more than 15,000 units installed of this last version.
• Compatible with the new megom OnLine platform, which allows you to reprogram all the parameters of the EMBI_V3 and perform the periodic tests required by EN 81.28, these functions are free of charge.
• ACCORDING TO CURRENT REGULATIONS, NEWLY INSTALLED EQUIPMENT MUST INCLUDE
  • Electrical with shaft size less than 30mts. or hydraulics with machine room with direct communication with the elevator shaft.
    • 1 unit of bidirectional intercom module in push-button panel.
    • 2 additional modules in cabin roof and lower part.
  • Electrical with a shaft size greater than 30mts. or hydraulics with machine room without direct communication with the elevator shaft.
    • 1 unit of bidirectional intercom module in push-button panel.
    • 2 additional modules in cabin roof and lower part.
    • 1 intercom for communication between the panel and the other modules of the system.

Technical specifications of EMBI_v3 intercom module (Analog lines)
Supply voltage	9-30 VdcNecessary external source that must include battery for operation in case of mains power failure.
Mechanical dimensions	140x140x25,4 mm.
Operating temperature	0º to 50 ºC
Communications bus (up to 4 cabins)	Through the two wires of the telephone line
Intercom with machine room	By means of two wires and a conventional telephone
Real time clock	Included, the events that have occurred are memorized with date and time.
Voice synthesis	Spanish Portuguese Italian English German French
Communications ports	POS communications thread, same as with positionals. RS-485, compatible with any Elecmegom controller.
Information entries	Alarm button Technical alarm button End of alarm push button (EOA) Cabin alarm inhibitor
Exits	Output for communication initiated led 12Vdc Output for communication led established 12Vdc
Configuration switches	Choice of cabin within the group RS-485 bus resistor
Optional modules	Intercom with machine room Pushbutton module above and below cab Pushbutton/speaker/microphone module above and below the cab Loudspeaker and microphone module to be placed on the pendant station Induction Loop Amplifier Module (Inductive Loop)
Directives	99/05/EC 73/23/EEC 93/68CEE 89/336/EEC EN81-28
Harmonized standards	EN-55022 EN-61000 4.6 EN-61000 4.3 EN-61000 4.4 EN-61000 4.5 EN-60950-1

For users of this product we provide a complete guide in different languages. Click on the flag icon corresponding to the language you wish to download.

Description	Spanish	French	English
EMBI_Eco Specifications
Circuit diagram EMBI_Eco
EMBI_Eco_EM1000_EM2000_EM4000 Intercom Accessories
EMBI_Eco/EMBI4 button panel die-cutting drawing

• Electronic module consisting of a 7″ color graphic display with 800×480 resolution. Includes audio module for bidirectional communication via one of our tracks, GSM MK775 or MK875.

• Operation with EM2000 / EM4000 / EM1000 / EMADA controllers via single-wire connection. It is compatible with the rest of our displays and can combine different types in the same installation.
• Operation in stand-alone mode without magnets, without connections (by means of accelerometer and automatic learning system). Also with traditional method using magnetic detector.
• Incorporates voice synthesizer.
• Integrates in-cabin digital audio module for EN 81-28 and EN 81-70, with integrated loudspeaker and microphone (similar to EMBI4). Up to 4 cabins in the same installation connected to a single MK775 or MK875 GSM track
• Possibility of dynamic downloading of content (advertising, community notices, news, weather forecast, date/time, etc.) when working in conjunction with a GSM MK775 or MK875 track.
• All configurable remotely from our Megom-Online platform.
• Energy saving mode, the display can be illuminated with a lower intensity when a period of time has elapsed without the elevator having made any movement, activating automatically when a call is received.
• It incorporates emergency light, in case of power failure in the farm, through the 12Vdc input that will be fed from an external source, the entire screen will be illuminated in white with a higher intensity than usual.

Technical specifications of MK800 graphic displays
Supply voltage	10-30 Vdc
Maximum consumption	194 mA at 24 Vdc., 380mA at 12Vdc.
Screen resolution	800×480 pixel
Visible area of the screen	(H) 154mm x (V) 93mm
Mechanical dimensions	(H) 174mm x (V) 232mm x Depth 30mm
Operating temperature	0º to 45 ºC
3-day weather forecast and news	Subject to connection to GSM track MK775 / MK875
Real-time clock	Subject to connection to GSM track MK775 / MK875
Voice synthesizer	Included in the circuit, both in maneuver and stand-alone modes
Operation	Maneuver mode EM2000 EM4000 EM1000 EMADA Stand-alone mode Accelerometer or 1 magnetic detector Logic signals 8 inputs
Communications ports	Parallel (optoisolated inputs) 15 inputs Serial port at 4800 bps (configurable) CANBUS communications
Configuration	USB port for project recording Basic parameters from GSM track Advanced parameters from the Internet(Megom-Online)

For users of this product we provide a complete guide in different languages. Click on the flag icon corresponding to the language you wish to download.

Description	Spanish	French	English
User Manual MK800 v1.2
MK800 Design Guide
Machining of the MK800 pushbutton panel
MK800 stand-alone mode with 1 magnetic detector